Details:
31' Mariner Ketch Major Refit 2020 to 2024 - Beta 25 HP For Sale $55,000. Price Reduced to $47,500. NOW $45,000.
WILL SELL FOR $35,000. RIGHT NOW - CLOSING BY SEPT 30TH, AFTER THAT BOAT WILL GO INTO INSIDE STORAGE AND PRICE STAYS AT $45,000. - CONTACT OWNER 207-691-8601
Boat is fully rigged and ready to go, currently stored out of the water at Spruce Head Marine 04859.
We can also quote trucking to any location.
31' Mariner Ketch 1971 - Refit and Restoration May 2020 to May 2024.
Amount spent on restoration $60,000. + 2000 hours logged
Restoration inside heated building.
Solid fiberglass hull
Internal ballast encapsulated in keel, fiberglassed in.
Moveable ballast 450 lbs of lead net weights in 15 lb nylon bags secured.
Hull is insulated with 1/2" foam core glued to inside of hull, from rail to bilge, no sweating, some insulation value.
All Decks, cabin tops, sides were covered with fiberglass finish cloth and West System epoxy resin with paint coatings to finish. Sampson posts removed, Foredeck replaced and fiberglassed
Decks are non-skid.
All hardware, hatches, portlights, railings, bowsprit, teak trim bedded and sealed with either 3M 5200 or 4200
All Teak toe and rub rails, coamings, trim, refinished, varnished, then painted with Epiphanes single part epoxy paint.
Companionway Teak and Mahogany foredeck hatch are varnished
New polished stainless port window trims $1,450
New opening bronze portlights with screens
Large opening bronze portlight installed at galley sink facing aft into cockpit w screen $400.
Cockpit completely removed and reframed with pressure treated southern yellow pine, 3/4 marine plywood deck and covers, fiberglassed with finish cloth and West System epoxy
All hardware removed and rebedded with 3M 4200
Hull faired and filled, painted with Epiphanes single part epoxy for ease of renewing.
Dorade boxes fiberglassed and faired into deck
Bronze base screw in Cowl Vents
New 22 x 22 Mahogany Deck Hatch with 3/8" smoked Lexan w custom canvas cover
External insulated icebox on deck for loading block ice vented to separate icebox in galley, both have drains.
Interior Mahogany trim varnished.
Stainless lined slide in space for galley stove, currently used as extra storage space for tools and galley stuff
DECK & ANCHORING
New lifelines 1/4" stainless with Hayn fittings and turnbuckles $1,800
All Bronze and Stainless Hardware either renewed or replaced.
New Laminated Douglas Fir bowsprit
Stainless and Teak Bow Pulpit
Sampson Posts removed -
Mooring / Anchoring now use oversize Herreshoff Bronze Cleats on foredeck
Lofrans manual anchor windlass
Anchor fast Delta 22# with 70' Acco 5/16" high test chain and 100' 3/4 nylon rode
Double custom stainless bow rollers
Anchor fast Delta 22# stern anchor with chain and nylon rode
Bronze towing cleat and chock midship aft deck
ENGINE (20 hours since new)
New Beta 25HP diesel engine installed $10,800
Single lever engine control
75 amp alternator upgrade
8" high rise exhaust elbow
Upgraded engine panel
Beta 25hp w TMC40 2:1
Fiber glassed engine beds
New Bronze Stuffing box (shaft seal)
New 1 1/8" Drive shaft stainless steel $724
New 3 blade propeller 14 x 9 RH (Michican Dyna-Jet Bronze)
Drive saver
Vetus water lift muffler
New 2" Exhaust hose
New bronze cooling water T-hull, valve and strainer, and hoses
Cooling water via bronze vacuum break to exhaust 8" riser
Vacuum break is vented via 1/2" hose to through hull fitting aft stbd side for visual on water pump output
FUEL SYSTEM
Fuel tank custom 1/4" alum plate 30 gal by Clark Island Boats Works $900.
All new fuel fittings and hoses
Racor Fuel water separator with shut off valves
Inline electric fuel pump for ease of bleeding engine fuel system after filter changes
STEERING
Mahogany spoked wheel
Bronze Worm Drive steering gear behind wheel
Rudder shaft stuffing box, new hose boot, clamps and packing
SAILS
New Sails by Bohndel, Rockport, Maine
Genoa 135 - Mitre Cut using Challenge 7.45 oz. Dacron, foam luff and Weathermax sunshield for $2700.00.
Mainsail - Challenge Newport 7.45 oz. Dacron, cross cut, 2 reefs, 2 full +2 partial $1,900. battens, and sail bag $1,900.
Mizzen - Challenge Newport 7.45 oz. Dacron, cross cut, 1 reefs, 2 full +2 partial $1,100.New blocks for running rigging
Sail covers $2,500.
MASTS
Main mast (height 35' from deck step) replaced with modified alum mast from an Ericson 34. Single spreaders, masthead sheaves and hardware in very good condition. Single winch for main halyard. Has Douglass Fir under deck to keel mast support
Mizzen mast (24' from deck step) is the original box laminated mast with single spreaders. Completely refurbished. Mizzen base support is 6"x6" pressure treated framed in under deck support.
RIGGING by Weymouth Yacht Rigging
Furlex 204S Furler
New Running rigging dacron
New Standing rigging 1x19 1/4" with Hayn fittings $9,900.
New 5/16 Bob Stay with 5/8 forged stainless steel eyebolt through bolted to stem above waterline
Dynema 1/4" Triatic Stay
Dynema/dacron Mizzen running back stays
Upgraded blocks added to sail tracks.
Bronze sail tracks refastened with new bronze screws.
Masthead wind vane
ELECTRICAL
Boat completely rewired
New DC Panel with 20 Breakers Paneltronics $500
2 new Group 27 Marine Deep Cycle batteries
Guest ProCharge 2 bank battery charger
ELECTRONICS
Icom VHF
10" Chart Plotter with new antenna
Raynav Depth Sounder
Ritchie HB 740 Compass
WATER SYSTEM
Water system all new hoses, faucets, water pump and upsized pressure tank
6 gal hot water heater using engine heat with elect option available
HEAD
Head with new Rairtan PHII toilet direct to tank only, Moeller 12 Gal plastic holding tank with all new hoses with Y V-valves options for deck pump out or offshore overboard discharge
Shur-flow Macerator Pump to overboard discharge only.
Head sink and discharge T-hull and valves are bronze
SAFETY
2000 GPH Elect bilge pump
500 GPH elect bilge pump
Throwable life ring (not new) and 60+ ft of floatrope
2 Fire extinguishers
MISC NEW
New Sunbrella covers for the Steering Wheel, Hatch Cover, Companionway Cover $1,500.
Brass or stainless interior lighting fixtures
New fenders
New 5/8 nylon Docklines x 4
Everything is either new or refurbished. Some pricing mentioned, but all prices are trade discounted not retail. Approximately $60,000. was spent on Engine, Sails, rigging, equipment, parts and supplies. Owner has logbook detailed with 2000+ hours hands on restoration. Hundreds of hours in research, parts ordering and so on.
Contact Brokers
Disclaimer: ALL DETAILS BELIEVED TO BE CORRECT BUT WITHOUT GUARANTEE - VESSEL OFFERED, AS IS, WHERE IS, SUBJECT TO PRIOR SALE, PRICE CHANGE, OR WITHDRAWAL WITHOUT NOTICE |
